Rifle Scopes

In my opinion, you would have to really NEED *that reticle*
to justify the extra cost for just an OK piece of glass that typically
runs $260.00

Having owned and sold 2 DMS 1’s and a CRS, let me point out a few critical differences aside from just the reticule. Although made by Millet Rifle Scopes and housed in a DMS body, the CRS is an FFP scope so the ranging and BDC Rifle Scopes works at any magnification, the size of the reticule adjusting accordingly.
It has a much bigger eyebox and better eye relief than the DMS 1, again by virtue of it’s FFP design. I got rid of my DMS’s ) because it felt as though if i moved my eye 1/4" in any direction off centerline to the scope it would black out. The result was slower on target times with the DMS than the rifle scope. ( and i do have a very consistant cheekweld, thankyou )
This made it more effective as a red dot-ish scope at 1X on targets more than 10 ft away than the DMS. At 4X the reticule comes into it’s own, the ranging and BD adjustments are incredibly intuitive.

Although they were made by Millet , Ed is a stand up American who’s trying to realise his dream. Read the whole thread referenced above for some insight.

alsignasdg56
-

AR-15 Magazines

I’ve checked with distributors and at your web site and the only versions I see of your SS AR mags are with CS springs. Is there an option to order them with SS springs?? I know you guys are slammed right now and don’t expect an immediate response but I’d sure like to add to my AR-15 Magazines "collection" if I can get "maintenance free" mags (SS bodies and SS springs). Thanks for providing the products and services that you do.

alsignasdg87

AR-15 Magazines

I was in the CProducts sight ordering the 30 round stainless AR-15 mags when I saw the big question: "Black follower" or "Orange follower" ? Geees…decisions, decisions. I want the CProducts improved follower. Is that the orange one?

I couldn’t find any info on their AR-15 Magazines (maybe it’s there but I just didn’t look in the right place?) I called them but the phone rings and rings and there was no answer. No biggie considering it’s the dawn of the Obama-ju-mama era, and they must be EXCEEDINGLY BUSY!

Also, would the 30 round stainless CProducts mag parts interchange with my old Colt ar-15 aluminum magazines (with black follower) in the event of a SHTF emergency?

alsignasdg86
-

AR-15 Accessories and Parts

f you are on a budget, buy a stripped lower receiver from an AR-15 Accessories FFL near you (if you pay less than $200 OTD you are probably doing OK these days). Then order a complete kit of your choice from Model 1 Sales, J&T etc. for around $5-600. You can assemble the rifle yourself with simple hand tools (screwdriver, hammer and a few punches) in an hour or so. Don’t believe the Colt/Bushmaster/Armalite snobs… the rifle you build will be just as functional as any other. I built my 3-gun rifle this way, and it is still flawlessly reliable and AR15 tack-driving accurate after 8 years of rough match use !

alsignasdg54

Magpul

went shooting today at Hernando Sportsman in Brooksville, FL. Chris Costa who runs the training division from MagPul was in the lane next to me. He had a couple of tricked out SBR’s one MagPul lower, the other on a KAC platform, and .308 with a can. His kids were with him and he was teaching them to shoot. They looked like they were about 10 and had no problem hitting a 12"x14" steel plate at 100 yrds.

alsignasdg74
-

Uncle Mikes Holsters

Recently I have taken the time to purchase all Galco carry pieces for my Colt 1911 carry gun Holsters and also more leather Holster for the High Power….let me tell you, there is a WORLD of difference between Fobus/Uncle Mikes type stuff and Galco/Mitch Rosen/SafariLand type stuff.

You absolutely cannot afford to buy cheap leather/kydex for a carry piece any more than you can afford to put a Simmons scope and 12 dollar weaver mounts on a Steyr PSG….and expect decent results anyhow.

I’ve had 2 and love them. I had one for my Sigma and it didn’t hold it well but it did hold it. My Uncle Mikes Holsters Glock 22 locks into mine and will stay in through just about cowboy holster. Only problem with them is that they can be two hard to get off my Tactical holster. Not really that big of a deal.

I got news, don’t like cheap stuff, fine, don’t buy it. That Video is BS, because those two are obviously trying to break that holster. I suspect I could do somehting similar with most any brand of paddle concealment holster out there. Paddle holsters are about convenience, not ultimate security, if you want 100% security, buy an UM pro-3. Personally, I own a Fobus for almost every pistol holster I own, and just placed an order for 3 more. I have been Using Fobus since they came out, weekley, for IPSC and 3gun competitions, and have abused the heck out of them with ZERO problems. About a year ago, at a 3gun match, I fell during a stage. I was wearing a Fobus C21 1911 paddle Uncle Mikes Holster. I fell hard, directly on the Handgun Holster, with the rear sight of my pistol digging into a barricade. The concealment holster was strong enough that it ripped my jeans and flipped me over as I fell without breaking.

FObus haters are Just like Wolf Haters, they cannot be reasoned with or dissuaded. They feel if you didn’t spend as much money as possible or at least much as they did, then you are inferior as a human being. It’s your money, spend it however you like.

alsignasdg12

Beretta 21 Magazine

I’ve had my Beretta 21Magazines (.40 S&W) for over 16 years and thousands of rounds. Only ever replaced the recoil spring as a preventative maintenance thing. Never a problem. Keeps firing every round and is as accurate as the day I bought it. I have spares (including a locking block) but have never needed to replace anything.

The more guns you have, the less rounds you’ll shoot through each, thereby reducing the possibility of breakage.

My favorite load for the Beretta 21Magazine is a 125gr lead TC bullet over 3.9 grains of 231. With this 25000 PSI load the Beretta should last forever. Just in case, I have another on standby.

Alot of people are preoccupied with +P+ and durability. My answer is handload and shoot reduced power loads. This way you get all the pleasure with none of the pain. If you ever have to use your gun defensively, I can guarrantee that you won’t notice the difference in noise or recoil

alsignasdg26
-

Rifle Scopes

was looking at the GRSC CRS Rifle Scope myself and really like everything it offers! I don’t like that it’s a Millett with w/ a great reticule because of the Millett’s weight and less than stellar performance. Some of the things mentioned above (minus the ridiculous comparison to NCstar) including the fact that no more will be made in the foreseeable future, steered me away from it.

I’ve come across the new Burris Rifle Scopes XTR-14 and have decided on it. 1-4×24 illuminated horseshoe/dot 100-1000yds bdc calibrated for 5.56 62gr approx $550. I was very pleased with my Burris FFII for a $200 scope; FFII is their budget line while XTR is top of the line!

alsignasdg60

Bersa 380 magazine

I have a Bersa 380 magazine that was engraved and given to me on my 16th birthday. Well it sat there for several years, the only action it seeing is a wipe down with oil every now and then. I finally shot it yesterday.

I must say I was very displeased with it. My groupings were terrible, and all to the right. Not to mention I used the same grip method I use for my 1911 and it would cause the slide lock to lock open after every shot.

I am thinking about removing the magazine safety. I think this would help alot with my groupings. I am also thinking about just putting it back in the safe and let it be.

All in all however I do like the design, minus the magazine safety. I am however going to go back to my Bersa 380 magazines because I am very surgical with them, not to mention I messed around with this girl who I just found out has a psycho boyfriend, so I want all the caliber I can get a the moment. I just think it would take me way to much time getting use to the trigger of the BHP to be worth it.

alsignasdg28
-

AR-15 Magazines

his, some folks like a bright follower, me I hate anything bright, I don’t even like stainless AR-15 magazines (to shiny).

Any chance Larry might give us a hint on how far backordered the SS ar-15 are, I’m still waiting on my order from 6 Nov. (I Know things are busy, the the e-mail said 2 weeks, and that was 4 weeks ago)

The stainless steel magazines are backlogged about 4 weeks. Again, we set aside each day internet orders and distributor/OEM. Each department is alloted a certain amount.

alsignasdg88

safariland tactical holsters

The Bianchi Shoulder holsters have since been redesigned with wider leather shoulder holster and a plastic safariland tactical holsters that is too wide to be caught in the trigger guard.

Consumers should stop using the revolver holsters immediately and bring them to a Fobus USA distributor for a free replacement holster or contact First Samco for instructions on how to return product for a replacement. Consumers can also send the recalled holster to Fobus USA in Southampton, and will be reimbursed for return shipping.

For more information consumers can call 866-508-3997 between 9 a.m. and 5 p.m. ET Monday through Friday.

Had Fox news on while I was doing something else in the house, but I glanced up and saw one of those rolling headlines at the bottom of the screen. If I’m not mistaken, it said something to the effect that a certain model of Fobus holsters is being recalled because of eight incidents where a strap or something pulls the trigger when the weapon is drawn. Yikes; I’ve got two Fobus Roto-Bianchi Shoulder holsters (1911 and Glock Magazine 19). Mine don’t have straps, though. Made me wonder. Anyone else heard anything

‘ve rarely seen anything other than the standard black and brown but this seems like it would be a great line for Cav Arms or Bladetech to introduce. Maybe something like the Orange stocks marketed by Speedfeed for Dedicated Less Lethal Shotguns.

I have a question about the 6xxx series tactical revolver holsters. How tight is the Bianchi Shoulder holsters if you are shooting when you are kneeling? I am kinda on the big side and the last time I had a tactical revolver holsters it cut off circulation on my right leg. Granted it was an airsoft revolver holsters but I just don’t want to purchase the holster and then find out it isn’t going to work out. I know I know I should lose weight but will that matter?

Just picked up a Fist #5 pocket holster for my P3AT, it came tighter than a tic. After a few afternoons & evenings infront of the tube working the unloaded pistol in & out it is now perfect. safariland tactical holster this is w /o a doubt the finest pocket holster I have tried.

I just looked on their website. The nearest I could find is the "concealable belt holster" but I could swear the packaging at the time said COP on it. May be wrong, it’s been nearly four years.

Either way, the holster was crap. Switched to a 20 year old Galco made of thicker, tougher Leather Holster and that held up. Galco uses too much oil.

After spending $140 and waiting six months, I received a High-Noon "safariland tactical holsters Argument" for my G26 (I know, not the same as you’re talking about, but High-noon follows a similar pattern for their IWB holsters). Thank god for their no-questions-asked return policy. It felt like I was carrying a brick in my pants. I shipped that POS back ASAP, and bought an MTAC. It was $80 and it came in a week. It is so comfortable I forget it’s there, and it conceals nicely.

One thing I’ll give High-Noon: they use metal belt clips. If the MTAC had metal belt clips, it would be perfect. For $25, the Bare Asset may get the job done cheaply, but the High-noon design is subpar, Tactical holster.

alsignasdg22
-

Eotech

Has anybody been able to mount the newer Eotech 517 or 557 over the bulky M4 handguard (like on the Colt 6920) and be able to fit a 3X magnifier and BUIS too? I want to be able to swing a 3x magnifier to the side and be able to use my ARMS low profile BUIS. It seems like now that the new Eotech 517 is designed to sit over that bulky M4 handguard, I ought to be able to buy a swing-to-the-side mount that also allows me to use my low profile BUIS too.

alsignasdg68

Galco Holsters

Many service members strongly prefer a quality leather shoulder system to the synthetic flap Blackhawk Holsters issued by the military. We at Galco Holsters, along with some of our loyal customers, have taken note of the high demand for our Bianchi Shoulder holsters Handgun Holster systems among the courageous American military personnel who are fighting the ongoing War on Terrorism. The vast majority of Galco holsters sent to personnel in Iraq and Afghanistan have been purchased with the private funds of service members and their families. Galco Holster elected to help support these fine men and women by instituting the Handgun Holster for Heroes™ program.

alsignasdg03
-

BIANCHI HOLSTERS

In 1958 John Bianchi had a vision of what he thought a duty holster should be and set out to develop a line of products that carried out that vision. Since that time almost 50 years ago, Bianchi Sholder holsters, belts and accessories have been used in police, military and sporting applications the world Gun holsters.

The world is changing and we are very aware of that at Bianchi Holsters International, which is why our product line continues to evolve to keep pace with today’s customer demands. We are continuously researching new materials, developing new designs and entire new product lines to meet these changing Pistol Magazines.

I have an Andrews Leather Bianchi Holster With a body shield for all my CCW guns.
Sam is a great guy and has been hand making these rigs for years.
Once you get is broke in, you won’t notice it. The most comfortable Blackhawk Holster I have ever

alsignasdg02

Aimpoint

Integral Picatinny-style base allows easy attachment to any rail. Aimpoint Patent pending mount is keyed to the sight body to absorb recoil. Hard anodized non-reflective finish. Precision adjustments for windage and elevation. Top of protective caps fits into holes on adjustment screws - no other tool required. Unlimited field of view, parallax-free and unlimited eye relief. Unaffected by extreme weather conditions. Up to 50,000 hours of use on a single CR 2032 battery. 4-MOA dot. Submersible to 80 feet.

wgowerg61 -

Two Marietta police officers involved in April’s shooting death of teenager have been cleared by a Cobb grand jury. The officers, Andrew Phillips and Justin Rutland, were placed on administrative leave immediately after the April 16 shooting of Read on

President Bush could have commuted the death sentence of Ronald A. Gray, a former Army cook convicted of multiple rapes and murders. But Bush decided Monday that Gray’s crimes were so repugnant that execution was the only just punishment. Bush’s Read on

A PSYCHIATRIST who tried to take a loaded gun into a Melbourne court has admitted having an inappropriate sexual relationship with a patient almost two decades ago. Dr Jerry Gelb - suspended from treating patients over the gun incident early last Read on

SKS MAGAZINES

TAPCO SKS 20rd Magazine (Black)

Utilizing the latest technology and military grade materials, our 20 round SKS MAGAZINE is newly designed from the ground up to enhance the capabilities of the SKS weapon platform. Incorporating a steel floorplate for maximum strength and horizontal finger grooves for a solid grip, this detachable magazine is a necessity for the serious SKS shooter. Designed to securely fit composite stocks, this magazine will work in wood stock variations with slight modification to the magazine opening. In order for the magazine to fit properly in the wooden stock version, the opening must be enlarged slightly for a proper fit. The bolt must be back in order to insert and remove the magazine. This item counts as 3 U.S. Sec 922R compliant parts.

wgowerg18 -

Teen fatally zapped by Taser likely youngest victim
CTV.ca Jul 24 2008 6:19PM GMT

Interesting
Like IPSC and E-Postal matches but for Airsoft.

Like IPSC and E-Postal matches but for Airsoft.

Sask. scraps jail Taser use plans
National Post Jul 24 2008 2:08PM GMT

Money where your mouth is
Looks like the NRA is pushing the Second Amendment Enforcement Act. Good. The Hill notes that NRA is pressuring conservative Democrats to put up or shut up: The National Rifle Association is putting the election-year squeeze on conservative Democrats, demanding that they buck their leadership to support a bill to erase more of the District of […]

Looks like the NRA is pushing the Second Amendment Enforcement Act. Good. The Hill notes that NRA is pressuring conservative Democrats to put up or shut up:

The National Rifle Association is putting the election-year squeeze on conservative Democrats, demanding that they buck their leadership to support a bill to erase more of the District of Columbia’s gun laws.

Democratic gun rights supporters will risk losing their A-plus rating if they don’t sign a discharge petition to be filed Wednesday bringing the gun-rights bill directly to the floor.

It will be the first time in more than 20 years that the NRA has “scored” a discharge petition in determining the grades it gives lawmakers before the November election, said spokesman Andrew Arulanandam.

Hats off to NRA for that one. Put the pressure on. Typically, gun bills are avoided like the plague in election years.

Armed citizens stop Memphis street shooter
From GUNED.COM– Police in Memphis say a gunman firing a pistol beside a busy city street was subdued by two passers-by who were also armed.

Teen dead after being hit with Taser
Ottawa Sun Jul 24 2008 3:44PM GMT

Bear hunting

Our original area is approximately 1,100 square miles in size. For the last 4 seasons, we have leased a portion of 2 bordering hunting concessions. These leased areas more than double the size of our original area, bringing the total size to over 1.6 million acres of exclusive hunting area. Hunting pressure is light. The entire area is very mountainous; there are numerous lakes and rivers throughout the territory, most with excellent fishing. The major watersheds are the Finlay, Thudaka, Kwadacha, Kechika, Jackstone and Frog Rivers. We are located in North Central BC, approximately 150-200 miles south of the Yukon border, and dead center, between the Cassiar and Alaska Highways. Stone Sheep, Mountain Goat, Mountain Caribou, Canada Moose, Rocky Mountain Elk, Grizzly, Black Bear & Wolf are hunted here.

brown bear hunting

wgowerg28 -

Rifle Scopes

EOTech 511-A65 Tactical Red Dot Sight w N Alkaline Battery and Standard Reticle
Code:EOT-511-A65
Price: $356.00
Quantity in Basket: none

psrobrs70